home *** CD-ROM | disk | FTP | other *** search
- Path: news.voicenet.com!usenet
- From: jgentry@voicenet.com (Jim Gentry)
- Newsgroups: comp.dcom.modems
- Subject: Re: What's a 16550 look like?
- Date: Wed, 17 Apr 1996 16:08:02 GMT
- Organization: Haven't been organized in years.
- Message-ID: <31751426.3292743@netnews.voicenet.com>
- References: <4ktvco$jo5@cronkite.seas.gwu.edu>
- Reply-To: jgentry@voicenet.com
- NNTP-Posting-Host: slip-199-234-235-62.voicenet.com
- X-Newsreader: Forte Agent .99d/32.182
-
- tmittman@seas.gwu.edu (Edward M. Mittman) wrote:
-
- >I recently purchased an internal modem that has a "high speed 16550 UART"
- >interface. However, none of the chips on it says anything like "16550" on
- >it.
- >
- >What does one of these things look like? And whats the big white thing on the
- >PC board that says "AT&T ... BABT"?
- >
- It is very unlikely that any modern modem design includes a *discrete*
- UART integrated circuit. The functionality of the 16550 UART is
- integrated into the custom modem chips designed by the modem vendor or
- OEM designer such as Rockwell. There is probably at least two rather
- large chips, perhaps 1.5 to 2 inches square on your modem board; the
- "big white thing" on your board is one of these... AT&T was likely the
- designer/OEM for this chip. These are the custom modem chips
- sometimes called ASICs (Application Specific Integrated Circuit).
- One of these chips contains the logic that provides the 16550 UART
- functionality, along with much of the signal processing capability of
- the modem. You have probably heard the terms "Data Pump" or "DSP"
- (Digital Signal Processor), these functions are also integrated into
- the large custom chips.
- Hope this helps...
-
- Jim Gentry
- Mt. Laurel, NJ
- jgentry@voicenet.com
-